Premium anti-scuffing and assembly paste
Molyslip® AS60 is a premium-performance, anti-scuffing and assembly paste containing pure molybdenum disulphide (MoS2). Molyslip® AS60 is designed for use in situations where a hydrodynamic oil film cannot be tolerated or is impossible to achieve – for example during component assembly, machine start-up and high load/slow speed operations.
The high load-carrying capacity of the MoS2 and graphite solids (in excess of 140,000 psi which is above the yield point of most metals) provides an ultra-low-friction physical barrier between metal surfaces preventing micro-welding or pick-up that can irrevocably damage components from occurring.
Molyslip® AS60 is suitable for multiple uses including: as an anti-seize on fasteners, an assembly aide, a lubricant on sliding mechanisms, plain bearings, pins, bushes and valves and as start-up or run-dry protection on gears.
FEATURES AND BENEFITS
- Ensures bedding in without scuffing or scoring
- Reduces wear and cuts costs
- Protects against rust and corrosion
- Eases assembly of tight tolerance components
- Withstands extreme loads
500g tin and 5kg pail
TECHNICAL DATA (TYPICAL VALUES)
|Particle size of molybdenum disulphide||0.5 to 5.0 microns|
|Effective temperature range||-100°C up to +550°C|
|Solidification point (of the base fluid)||-20°C|
|Coefficient of friction (steel on steel, steady-state)||0.08|
When a compound is applied to a threaded fastener that will be tightened to a specific torque setting, the torque setting will require adjustment to allow for the lubricating effect of the compound. Failure to do so can result in incorrect tension in the fastener. Correct torque settings can be calculated using the tables and charts below and the standard thread equation:
T = KDP
T = Torque (N.m), D = Diameter (m), P = Clamping force (N), K = Nut factor
|Material||K Nut factor|
|8.8 Steel self-coloured||0.11|
|8.8 Steel BZP||0.06|
|8.8 Steel Hot-dip galvanised||0.11|
|A2 Stainless steel||0.12|