Superior lubricants for superior performance

COPASLIP™

High-temperature anti-seize compound

COPASLIP™ is a high-performance compound specifically formulated to protect fasteners from seizure induced by extremes of temperature, pressure and corrosion. The semi-synthetic base fluid is reinforced with anti-oxidants, corrosion inhibitors and ultra-pure copper particles to provide outstanding protection to threads and components.

COPASLIP™ minimises variations in frictional interference between threads, allowing accurate and consistent assembly. It also prevents galling and seizure during assembly and dismantling – even after long periods of exposure to high temperatures, corrosive environments or high pressure.

Features and benefits

  • Ensures consistent friction between threads
  • Protects against galling and seizure
  • Protects against rust and corrosion
  • Eases assembly of tight-tolerance components
  • Withstands extreme temperature

Instructions for use

COPASLIP™ should be used as supplied. Ensure surfaces to be treated are clean and dry – free from oil, grease or dirt contamination. Apply a thin even coating by rubbing onto the surface with a lint free cloth or brush.

Packaging

100g tube, 400ml aerosol, 500g tin, 5kg and 20kg pail

Technical data (typical values)

 

Property

Result

Consistency

NLGI 1

Base oil viscosity

100 cSt

Drop point

>300°C

(non-melting)

Flash point (IP34)

>200°C

Effective temperature range

-40°C up to +1100°C

Solidification point (of the base fluid)

-20°C

Coefficient of friction (steel on steel, steady state)

0.12

When a compound is applied to a threaded fastener that will be tightened to a specific torque setting, the torque setting will require adjustment to allow for the lubricating effect of the compound. Failure to do so can result in incorrect tension in the fastener.

Correct torque settings can be calculated using the tables and charts below and the standard thread equation:

T = KDP
T = Torque (N.m), D = Diameter (m), P = Clamping force (N), K = Nut factor

Material

K Nut factor

8.8 Steel self-coloured

0.14

8.8 Steel BZP

0.10

8.8 Steel hot-dip galvanised

0.14

A2 Stainless steel

0.13

Brass

0.12

Download







Request Safety Data Sheet

Name*
Company*
Telephone number
Add dialling code if outside UK
Email address*
Product(s)*
Choose multiple products below
 
Where to buy Technical data Ask the expert Contact us