Superior lubricants for superior performance


Molybdenum disulphide dry-film lubricant

Molyslip® DRY MOLY SPRAY is a high performance, resin-bonded, dry-film lubricant based on molybdenum disulphide. When applied to metal substrates the molybdenum disulphide forms a resilient, low friction film that protects against wear and corrosion. DRY MOLY SPRAY reduces metal pick-up and galling during component assembly and dry start-up conditions and where traditional ‘wet’ lubricants either cannot be used or do not provide adequate lubrication.

DRY MOLY SPRAY can be used in a wide variety of operating conditions – the applied film will operate between   -50°C and + 450°C without flaking or cracking. Unlike oils and greases the dry nature of the film will not attract dirt and dust and it is resistant to water wash-off making it ideal for use in extreme environments.

Features and benefits

  • Low co-efficient of friction film provides outstanding protection against wear
  • Wide operating temperature range of -50°C to +450°C
  • Does not attract dirt and dust
  • Touch dry in under 1 minute allows components to be in service quickly
  • Prevents pick-up and galling

Instructions for use

Shake well, hold can upright and spray from a distance of approximately 15-30cm. Coat the metal surface evenly and allow to dry. After spraying invert the can and spray until clear (failure to do this can result in valve blockage). If required burnish the surface with a lint free cloth after a minimum of 1 minute drying time.


400ml aerosol

Technical data (typical values)



Appearance of applied film

Grey/black dry film



Co-efficient of friction


Effective temperature range

-50°C up to +450°C


Request Safety Data Sheet

Telephone number
Add dialling code if outside UK
Email address*
Choose multiple products below
Where to buy Technical data Ask the expert Contact us